{"id":1270,"date":"2023-09-19T19:53:43","date_gmt":"2023-09-19T11:53:43","guid":{"rendered":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/?page_id=1270"},"modified":"2023-09-19T20:19:24","modified_gmt":"2023-09-19T12:19:24","slug":"commission_nursing_en","status":"publish","type":"page","link":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/en\/commision_en\/commission_nursing_en\/","title":{"rendered":"Care Guide"},"content":{"rendered":"\n

Care Guide<\/strong><\/h2>\n\n\n\n

Taking good care of your fursuit starts before you even put it on. We can avoid most of the damages, stains and odors by taking simple precautions. As a human being(?) who has been wearing fursuit for more than 10 years, I would like to give you some conscientious advice.<\/p>\n\n\n\n

Care guide: before putting on the fursuits<\/strong><\/h4>\n\n\n\n

Maintain good hygiene habits. This is the most important thing! Bacteria and odors like textiles and a warm, humid environment. We can’t avoid naturally occurring body odors, but don’t let those odor-producing bacteria breed in a hotbed. Clean ourselves thoroughly before we put on our fursuits, using shampoo, soap or your favorite cleaning products to scrub ourselves clean, or use deodorant or antiperspirant if needed.<\/p>\n\n\n\n

Wear appropriate underwear, I recommend spandex long-sleeved trousers, or a one-piece to keep comfortable and clean from the inside out. Human skin will continue to secrete oil and shed dead skin flakes, and then trapped in the clothing, these oils and flakes will help bacteria breed and increase the odor. If we set up a barrier between the fursuit and the skin, our fursuit will stay brighter. If you can’t wash your clothes in time for a cons or a trip, bring a few extra sets of underwear or hand wash them when you have time to prevent bacteria and odors.<\/p>\n\n\n\n

In addition, scout the environment. Before putting on your fursuit, be sure to familiarize yourself with the danger areas of the location!!! Puddles, mud, steps, pools, and even drinks and food can all stain our fursuits. And when we put our heads on, these things may be even more difficult to avoid, so be sure to make sure before wearing the fursuit!<\/p>\n\n\n\n

Care guide: When entering the fursuit<\/strong><\/h4>\n\n\n\n

Stay away from all dangerous areas!!! Always be aware of our surroundings and stay away from all hazardous areas!!! Food residues may be difficult to clean; open flames can burn textile products and our fursuits; chlorine in the pool water may damage the fur material, and fursuits that has been saturated with water may be stretched due to the weight of the water, all of which may shorten the life of the fursuits. It may even cause burns or drowning due to the burning of the fursuit or the extra weight when it is filled with water, so I ask you not to do this. Please!!!<\/p>\n\n\n\n

Avoid excessive activity!!! Burst seams, damaged fabric, and missing claws and teeth are often the result of excessive activity. Even though the studio makes our fursuits very sturdy, over time, as the material ages, excessive activity can cause damage, common sense, right?<\/p>\n\n\n\n

Also, don’t make sudden moves when you don’t know what’s around you. The person next to you may be serving a plate of gooey cheese pizza, which smells good, but is also hard to wash. Always check your surroundings and don’t think that you are the only one in the world who can move!<\/p>\n\n\n\n

Care Guide: After taking off the fur coat<\/strong><\/h4>\n\n\n\n

Cleaning the body and tail (fursuit\u2019s)
Cleaning paws and feet-paws (fursuit\u2019s)
Deep cleaning the head, both inside and outside (fursuit\u2019s)
By the way, clean the whole body (yours)<\/p>\n\n\n\n

After each fursuiting, check the fursuit thoroughly from the ear-tip to the tail-tip, looking for any stains or damages. If necessary, use a wet towel and disinfectant spray to clean the stain. Make a note of any parts that need attention so that you can confirm them later. If possible, hang the coat on a broad-shouldered hanger and groom it if you have time.<\/p>\n\n\n\n

If you are only wearing it lightly (for short periods of time without a lot of sweating), hang up the fursuit and dry it thoroughly with a fan (cool air). The head can be well ventilated with a small fan. If there is still some time before the next use, turn out the inside of the suit and spray it with a disinfectant spray. The inside of the paws should be sprayed with disinfectant spray and air dried, and the inside of the feet-paws can be sprayed with alcohol or shoe spray to remove odors. Remember that when you spray the disinfectant spray, do not wear it until it is completely dry!!! After heavy use, please clean all parts of the fursuit completely and carefully.<\/p>\n\n\n\n

How to clean the body of the fursuit<\/strong><\/h4>\n\n\n\n

We recommend using a front-loaded washer. If the washer is large enough to accommodate the entire body, a up-loaded washer is also possible.<\/p>\n\n\n\n

    \n
  1. Turn the suit inside out, remove all the padding you can from the inside, and zipper it completely. Or use a laundry bag large enough to hold it.<\/li>\n\n\n\n
  2. Set the washing machine to cold.<\/li>\n\n\n\n
  3. Pre-loaded the detergent to the washing machine.<\/li>\n\n\n\n
  4. If you want to use a softener, you can use it after the first wash.<\/li>\n\n\n\n
  5. After the default spin cycle, it is recommended to spin one more time. This will remove as much water from the suit as possible. Reposition the suit between two cycles.<\/li>\n\n\n\n
  6. Turn the suit right side out and hang it on a broad-shouldered hanger.<\/li>\n\n\n\n
  7. Hang in a well-ventilated room and use a high velocity fan to dry it. It usually takes two days to dry completely.<\/li>\n\n\n\n
  8. Regular grooming from top to bottom in the direction of the fur, at least two to three times.<\/li>\n\n\n\n
  9. Make sure your body is 100% dry before storing it in a closet (or any unventilated places) to prevent mold.<\/li>\n<\/ol>\n\n\n\n

    How to clean the tail of the fursuit<\/strong><\/h4>\n\n\n\n

    Full suit\u2019s tails usually attached to the body, but even if they are separate tails, they could be cleaned in the same way as the body parts. If your tail has a padding inside that cannot be disassembled, please allow more drying time for these special types of tails.<\/p>\n\n\n\n

    How to clean the hand-paws of the fursuit<\/strong><\/h4>\n\n\n\n

    Hand paws with plastic claws or rubber pads can only be hand washed with detergent. Or use a specialized cleaning machine (see below). Only plush hand paws can be washed in the washing machine.<\/p>\n\n\n\n

    To dry washed paws, hang them up with a clip and use a high velocity fan for at least a day. During the drying process, groom regularly in the direction of the fur, at least once or twice.<\/p>\n\n\n\n

    How to clean the feet-paws of the fursuit<\/strong><\/h4>\n\n\n\n

    Clean the interior with a disinfectant spray after wearing to keep the interior fresh. Dry completely before the next use. Feet-paws with plastic claws or rubber pads can only be hand washed with detergent. Or use a specialized cleaning machine (see below). All plush feet-paws can be washed in the washing machine.<\/p>\n\n\n\n

    To dry washed feet-paws, place it in front of a high velocity fan for one to two days. During the drying process, groom them regularly in the direction of the fur, at least once or twice. And make sure the inside and outside are completely dry.<\/p>\n\n\n\n

    How to deep clean the fursuit head<\/strong><\/h4>\n\n\n\n

    Please note that it is important to protect the eyes of the fursuit head from cleaning agents during all cleaning processes. Many cleaning agents may damage the surface of the eyes and even cause discoloration.<\/p>\n\n\n\n

    You can use the specialized cleaning machine to deep clean the head, what we use is Bissel\u2019s machine, very simple and fast, you can following the instructions to many related videos on the Internet.<\/p>\n\n\n\n

    Light cleaning<\/strong><\/h5>\n\n\n\n

    Spraying the inside of the head with a disinfectant spray will keep the inside fresh. Avoid spraying directly onto the eye area and make sure the interior is completely dry before the next suiting.<\/p>\n\n\n\n

    Spot clean the outside with a moist towel. If water doesn\u2019t do the work, try a mixture of baking soda and water: make a paste and apply it to the stained area, rubbing gently. Rub until it\u2019s removed and then wipe it off with a wet towel or brush it off with a comb when it is dry.<\/p>\n\n\n\n

    Deep Cleaning<\/strong><\/h5>\n\n\n\n
      \n
    1. Spray the inside of the head with a disinfectant spray, avoiding direct spraying to the eye area, both inside and outside.<\/li>\n\n\n\n
    2. Mix water with a small amount of soap or detergent, soak in a small towel and wring it out slightly. Gently wipe the inside of the head, allowing the inside to soak in the soap water.<\/li>\n\n\n\n
    3. Using another towel with clean water, gently wipe the inside of the head to wash off the suds. Repeat several times until no suds remain.<\/li>\n\n\n\n
    4. Use a dry towel to absorb as much water as possible, and repeat several times until no more water can be absorbed.<\/li>\n\n\n\n
    5. Dry your head thoroughly with a high-velocity fan for at least one day.<\/li>\n\n\n\n
    6. Use a mixture of baking soda and water to make a paste and apply it to the stained area, rubbing gently. Rub until the it\u2019s removed and then wipe it off with a wet towel or brush it off with a comb when it is dry.<\/li>\n\n\n\n
    7. Using a smooth comb or brush, gently comb along the grain of the fur.<\/li>\n<\/ol>\n\n\n\n

      Repair and Cleaning Services<\/strong><\/h4>\n\n\n\n

      Poped seams? Don’t worry, in most cases it’s a problem that can be easily solved by yourself! Here is our Quick Seam Sewing Video, get your needle and thread ready and let’s repair it.<\/p>\n\n\n\n

      <\/figure>\n\n\n\n
      Repair Service<\/strong><\/h5>\n\n\n\n

      Please send us a letter or contact us through our official account, ask questions with the photos of the problem, and we will provide an estimated price and repair method for reference. However, since there may be a discrepancy between the photos and the actual inspection, the repair price and method may also change. Therefore, the studio will be able to give you an exact repair cost and completion time after receiving it.<\/p>\n\n\n\n

      The commissioner will be responsible for the full cost of repairs and modifications to the order during the non-warranty period, including shipping costs and return shipping costs after completion. Orders for completed repairs will be sent back upon full payment.<\/p>\n\n\n\n

      All fursuit parts sent to the studio for repair or modification must be completely cleaned before sending, and we will not repair unclean fursuit parts for sanitary reasons. mofumofufursuit reserves the right to refuse service, and\/or you may be charged an additional cleaning and handling fee for sending unclean fursuit parts.<\/p>\n\n\n\n

      Cleaning Service<\/strong><\/h5>\n\n\n\n

      Cleaning service is only available to customers in China due to hygiene and customs clearance. Please send a letter or contact us through our official account with your request at . If we determine that you can clean it yourself, we will usually give you direct instructions on how to clean your fursuit parts. If we determine that you are unable to clean them yourself, we will communicate with you about shipping and cleaning options.<\/p>\n","protected":false},"excerpt":{"rendered":"

      Care Guide Taking good care of your fursuit starts befo… \u9605\u8bfb\u66f4\u591a »Care Guide<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1304,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"neve_meta_sidebar":"","neve_meta_container":"","neve_meta_enable_content_width":"","neve_meta_content_width":0,"neve_meta_title_alignment":"","neve_meta_author_avatar":"","neve_post_elements_order":"","neve_meta_disable_header":"","neve_meta_disable_footer":"","neve_meta_disable_title":"","_themeisle_gutenberg_block_has_review":false,"_ti_tpc_template_sync":false,"_ti_tpc_template_id":"","footnotes":""},"_links":{"self":[{"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/pages\/1270"}],"collection":[{"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/comments?post=1270"}],"version-history":[{"count":1,"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/pages\/1270\/revisions"}],"predecessor-version":[{"id":1271,"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/pages\/1270\/revisions\/1271"}],"up":[{"embeddable":true,"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/pages\/1304"}],"wp:attachment":[{"href":"https:\/\/wpadm.mofumofu.art\/noleak\/secretroot\/wp-json\/wp\/v2\/media?parent=1270"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}